Car Mechanic Simulator 2021: Complete guide to the passage of story missions

Air filter (2 carburetor)
Oil filter (V8)
Standard tire (4 pieces) (215/75/R15)
Fuel pump
Brake pads (2 pieces)

Change the oil, add fluid to the washer reservoir, we change the fluid in the hydraulic booster and brake fluid.

Tires are changed on a tire changer, then they are balanced on a balancing machine next to.

Two silent blocks are located in the front subframe, two are in the trailing arms of the rear suspension.
List:
Ventilated brake disc (2 pieces)
Ignition coil
Oil filter (R4)
Belt tensioner
Tensioner roller A
Drive belt A (I4 B)
Camshaft (I4 B)
Silentblock (4 pieces)
Spark plug (2 pieces)
Brake pads (4 pieces)
Camshaft gear (I4 SOHC)
Change oil, power steering fluid, coolant, brake fluid and add washer fluid.

List of details:
Water pump (R4)
Generator
Clutch disc
Oil filter (R4)
Belt tensioner
Tensioner roller A
Clutch release bearing
Drive belt (R4 SOHC)
Drive belt A
Ignition wires (R4 SOHC)
Radiator S
Rally type A
Rally type V
Timing belt (I4 SOHC)
Fresh ignition (4 pieces)
Starter
Fuel pump
Fuel filter
Camshaft gear (I4 SOHC)
Change the oil and all other fluids.

Parts List:
Clutch disc
Rear stabilizer (BUT)
Ignition coil (2 pieces)
Crankshaft bearing cover (3 pieces)
Connecting rod cover (3 pieces)
Flywheel
Front center drive shaft
Front stabilizer
Wheel bearing (2 pieces)
Piston with connecting rod (2 pieces)
Camshaft (I4 B)
Silentblock (10 pieces)
Spark plug (2 pieces)
Valve train chain (I4 B)
Camshaft gear A (I4 B)
And the oil needs to be changed.

I will be brief and write a complete list of spare parts for car repair in Russian:
Rear trailing arm
Ignition coil (3 pieces)
Oil filter (V8)
Lower spring plate (2 pieces)
Front wheel hub
Camshaft (V8)
Timing belt (V8) (2 pieces)
Silentblock (6 pieces)
Spark plug (5 pieces)
Leaf spring stepladder (3 pieces)
Wheel trap 3
Fuel rail (Direct injection)
Brake pads (4 pieces)
One-piece rear drive axle
Front bumper
Change oil
Add fluid to the washer reservoir

Generator
GW disc 500 (2 pieces) (R19, departure 0)
Intercooler average
Oil pan (I4 B)
Exhaust front part A (I4 B)
Sports tire
Drive belt B (I4 B)
Radiator A
Steering rack

Hood
Left front headlight
Left side mirror
Windshield
Front left fender
Front right fender
Front bumper
Front license plate
Right headlight
Right side mirror

Add fluid to the washer reservoir
Change coolant

Battery
Radiator fan (I4 DOHC TAE)
Intake manifold (I6 DOHC BU2)
Throttle (I6 DOHC BU2)
Rear driving axle (2 pieces)
Ignition coil (3 pieces)
Cylinder head cover B (I6 DOHC BU2 T)
Cover for ignition coils A (I6 DOHC BU2 T)
Oil filter (R4)
Power steering pump (R4)
Belt tensioner (I6 DOHC BU2 T)
Wheel bearing (2 pieces)
V-ribbed belt B (I6 DOHC BU2 T)
Camshaft (I6 DOHC BU2 T)
Spark plug (4 pieces)

Trunk
Rear glass
Rear bumper
Hood
Left rear headlight
Left front door
Left front headlight
Left side mirror
Body glass, left A
Windshield
Front left fender
Front right fender
Front bumper
Front license plate
Right rear headlight
Right front door
Right headlight
Right side mirror
Right body glass A
Front left door glass
Front right door glass

Change oil
Top up washer fluid
Change the fluid in the power steering reservoir
Change coolant
Change brake fluid

We repair the rear right wheel suspension, there are no secrets here.
After finding all the suspension parts of the rear right wheel, one part will remain – oil filter. Change it and the mission is completed.
Do not forget to change the engine oil and change fluids.

We'll have to disassemble the entire engine, because the crankshaft needs to be replaced. You will also have to remove all the wheels and disassemble almost all the suspension..
Need to change bushings in the subframe and a fuel pump in the tank.
Better buy right away 16 rocker arms, because sometimes a replacement does not count..

Complete list of replacement parts:
Ventilated brake disc (2 pieces)
Air filter (V8 OHV F)
Generator (I6 B)
Clutch disc
Rear shock absorber B (2 pieces)
Crankshaft (V8 OHV F)
Valve rocker (7 pieces) (it's better to buy everything at once 16 new)
Crankshaft bearing cover (3 pieces)
Ignition distributor cover
Connecting rod cover (4 pieces)
Leaf spring (2 pieces)
Oil filter (V8)
Front stabilizer B
Front spring (2 pieces)
Wheel bearing (2 pieces)
Piston with connecting rod (3 pieces)
Piston rings (8 pieces)
Drive belt (V8 OHV F)
Ignition wires (V8 OHV F)
Distributor rotor
Silentblock (8 pieces)
The silencer is small (4 pieces)
Spark plug (5 pieces)
Starter (V8)
Rear hub strut C (2 pieces)
Leaf spring stepladder (4 pieces)
Valve tappet (V8 OHV F) (8 pieces)
Fuel pump
Fuel filter
Brake pads (4 pieces)
Valve train chain (V8 OHV F)
Camshaft gear (V8 OHV)

Change oil
Add fluid to the washer reservoir
Change the fluid in the power steering reservoir
Change coolant
Change brake fluid

Detail, which you most likely could not find, this is fuel pump.
List of parts for replacement or repair:
Battery
Air filter (I4 B)
Generator
Ignition coil (4 pieces)
Throttle body (V6 REMOVED)
Oil filter (R4)
Rally type A (2 pieces)
Rally type V
Spark plug (4 pieces)
Medium type B fuse
Fuel pump
Fuel filter

Change of oil
Replacing all other fluids.

We disassemble the engine almost completely, and also find all 4 brake pads, to be replaced.
List of details:
Air filter (Type A)
Generator
Cylinder head B (I3)
Oil filter (I3)
Belt tensioner
Piston with connecting rod
Drive belt B (I3)
Camshaft (I3)
Rally type A
Rally type V
Spark plug (3 pieces) (I would change everything at once 4)
Medium type B fuse (2 pieces)
Fuel rail (I3)
Brake pads (4 pieces)
Camshaft gear (I3)

Change oil and all other fluids

We disassemble the engine to the crankshaft, and also change the stretcher.
Normally, detail, which you might not find, this is fuel pump.
List of details:
Cylinder head (V8 OHV) (2 pieces)
Clutch disc
Crankshaft (V8 OHV)
Crankshaft bearing cover (3 pieces)
Oil filter (V8 OHV)
Front subframe A E
Drive belt A (V8 OHV)
Drive belt B (V8 OHV)
Silentblock (4 pieces)
Starter (V8)
Valve tappet (16 pieces)
Fuel pump
Valve train chain (V8 OHV)
Camshaft gear (V8 OHV)
Change all fluids and oil
Check wheel alignment.

Air filter (I4 B)
Retro disc 10 (4 pieces) (R13)
Oil filter (R4)
Belt tensioner
Front driving axle H (2 pieces)
Front center drive shaft
Standard tire B (4 pieces) (175/70/R13)
Drive belt (R4 SOHC)
Drive belt A
Camshaft (R4 SOHC)
Timing belt (I4 SOHC)
Spark plug (4 pieces)
Fuel filter
Brake pads (2 pieces)

To complete the task to increase the power by 10-15%, changing the following details:
Spark plug (4 pieces) (0.5% tuning)
Exhaust manifold (R4 SOHC) (1.5% tuning)
Front part of the exhaust system (0.9% tuning)
Middle muffler (1.65% tuning)
Exhaust pipe (0.9% tuning)
Catalytic converter (1.75% tuning)
Flywheel (3.25% tuning)
Clutch disc (1.75% tuning)
Clutch pressure plate (0.9% tuning)

We repair the hood, front right wing, right front door, after that we paint the car in the factory color.
We change all fluids and set the camber angle.

Almost all details are initially open in the order. Parts need to be delivered on the body, which are not on the car (be careful, some parts from the category of body tuning).
Three details, missing on the list:
Camshaft gear
Camshaft A (I4 DOHC TAE)
Camshaft B (I4 DOHC TAE)
Then we change all fluids and oil., we adjust the headlights and the order is ready.

All suspension needs to be disassembled.
List of details:
Double wishbone shock absorber (2 pieces)
Front shock absorber upper bearing (2 pieces)
Rear spring upper plate (2 pieces)
Air filter
Rear shock absorber B (2 pieces)
Rear driving axle fixed
Rear trailing arm (2 pieces)
Rear spring (2 pieces)
Oil filter (V8)
The lower link of the suspension A (2 pieces)
Lower spring plate (2 pieces)
Front spring (2 pieces)
Leaf spring gasket (2 pieces)
Front subframe А С
Silentblock (4 pieces)
Leaf spring stepladder (4 pieces)
Wheel trap 3
Fuel filter
Brake pads (2 pieces)
One-piece rear drive axle (2 pieces)

You also need to change the oil, top up washer fluid and check wheel angles.

Then, what could not be found right away – fuel tank and pump, upper bearings of front shock absorbers.
List of details:
Battery
Radiator fan
Front shock absorber upper bearing (2 pieces)
Intake manifold (I4 B)
ABS hydraulic unit
Cylinder head (I4 B)
Crankshaft (I4 B)
Crankshaft bearing cover (2 pieces)
Connecting rod cover (3 pieces)
Oil filter (R4)
Piston with connecting rod (4 pieces)
Piston rings (4 pieces)
Fuel rail (I4 B) (4 pieces)
Fuel tank
Fuel pump
Fuel filter
We change famous body parts, we paint the car in the factory color, we change all fluids in the car, check the headlights and wheel alignment angles.

4 details, which you might not find after disassembling the engine, this is 4 silentblock in stretcher.
Replacement Parts List:
Air filter
Clutch disc
Ignition coil (6 pieces)
Rocker arm A (V6 VQ37VHR) (2 pieces)
Oil filter (V8)
Tie rod end (2 pieces)
Belt tensioner
Tensioner roller A (2 pieces)
Tensioner roller B
Front shock absorber A (2 pieces)
Front steering knuckle A (2 pieces)
Front stabilizer
Front spring (2 pieces)
Clutch release bearing
V-ribbed belt A (V6 VQ37VHR)
Camshaft A (V6 VQ37VHR)
Camshaft B (V6 VQ37VHR)
Silentblock (4 pieces)
Spark plug (6 pieces)
Front stabilizer bar A (2 pieces)
Fuel rail (V6 VQ37VHR) (2 pieces)
Fuel filter
Crankshaft pulley (V8)
Don't forget to change your oil, replace power steering fluid, add fluid to the washer reservoir and set the wheel angles.

Complete bulkhead of the entire suspension, there are no pitfalls, just sorting everything out and putting in a new one.

We disassemble the entire suspension at the left front wheel, remove the checkpoint, do not forget about the expansion tank and battery.
List of details:
Battery
Ventilated brake disc
Radiator fan
Front shock absorber upper bearing
Disc Classic 12
Coolant capacity A
Transmission (R4)
Fan housing A
Oil filter (R4)
Tie rod end
Lower suspension arm
Front shock absorber A
Front drive axle C
Front steering knuckle A
Front stabilizer
Front spring
Front subframe A
Standard tire
Radiator A
Tie Rod
Silentblock (2 pieces)
Front stabilizer bar A
Front hub strut
Brake caliper A
Brake pads

By body:
Left front headlight
Front left fender
Front bumper
Front license plate

Do not forget to paint the car in the original color after replacing the body parts., change brake and coolants, set the corners of the wheels and adjust the headlights.

All details on the back of the machine, as well as front subframe and intercooler.
List:
Rear shock absorber A (2 pieces)
Rear muffler (V8)
Rear suspension link A (2 pieces)
Rear suspension link B (2 pieces)
Intercooler average
Lower spring plate (2 pieces)
Rear subframe
Front subframe A
Rear hub strut A (2 pieces)
Body:
Rear bumper
Windshield
Front bumper
Change oil, paint in factory color, replace coolant and brake fluid, check the wheel alignment angles and adjust the headlights.